Floor Lectern With Built-In Sound System, Gooseneck Microphone and Reading Light
Reading light only operational when plugged into a power source (does not work when running on battery alone)
HEATER - PROPANE 80,000 BTU
$214.50
Dimensions: 28" x 31" x 18"
Weight: 126lbs
Volts A.C. 60
Amps 1.5
Electrical 115
Electricity Required for Tent Heater - Generators Available Upon Request
12 CHANNEL ACTIVE PRESS BOX MEDIA FEED
$137.50
It provides a 60 dB gain adjustment for one mic or line input. The PressMite also features a built-in headphone amp. Two alkaline 9 V batteries provide power for typically more than 8 hours of continuous operation, monitored by a Battery OK LED. The batteries are easily replaced via side-mount trays. A 120 VAC / 24 VDC power adapter (model PS24) is included.
In MIC input mode, 18V phantom power is selectable and a three segment LED headroom display speeds level adjustment. If more outputs are needed, PB Series Press Boxes can be connected to the line outputs to provide up to 48 additional mic outputs. The PressMite's box is built to withstand the abuse of public events.
Frequency Response: 100 Hz-6 kHz +or-0.3 dB, 15Hz-20kHz +or-3.0 dB
Input Impedance: Mic: 1.5 kOhms; Line: 40 kOhms
Max Input Level: Mic: -14 dBu; Line: +30 dBu
Output Impedance: Mic: 150 Ohms; Line: 600 Ohms
Max Output Level: Mic: -17 dBu Mic Outputs; Line: +12 dBu
Total Harmonic Distortion: 0.063% at 1 kHz (unity gain)
Rise Time: 26 Microseconds
Phase Shift: -0.8degrees at 1 kHz (unity gain)
Intermodulation Distortion: 0.08% (unity gain, Mic mode)
CMR at 60 Hz: Mic: 75 dB; Line: 60 dB
Isolation:
Mic Outputs: 65 dB between vertically adjacent channel pairs, 107 dB between non-vertically adjacent pairs
Line Outputs: Greater than 77 dB
Power Requirements: (2) 9 V alkaline batteries or 24 Volt external DC (120 VAC / 24 VDC power adapter included)
MICROPHONE, FLOOR STANDING W/ TRIPOD BASE
$27.50
Adjustable microphone stand with a tripod base
Lightweight and extremely portable
