Popcorn Machine Guide

How to Operate

  • Turn the kettle heat switch, the kettle motor and the exhaust switch to “ON”.
  • Add package of “ALL IN ONE POPCORN” and close the lid.
  • Once the popcorn has stopped popping rotate the handle to empty the popped popcorn from the kettle, then return the kettle back to the upright position.
  • Repeat this cycle for each additional batch of popcorn. Subsequent batches are more flavorful then the initial batch.
  • Turn “OFF” the kettle heat switch after the last batch, when popcorn breaks over the lid of the kettle. This will eliminate smoke and odor.
  • Turn kettle motor and exhaust switches off. it is very important to ensure that all switches are switched OFF after use.
  • After cooling the kettle wipe exterior with a heavy cloth. This will prevent the remaining oil from burning.
  • When not popping keep glass doors OPEN.
  • DO NOT leave kettle switch on while there is no popcorn in the kettle.
  • Moto air intake and exhaust holes at the top of the machine must be clear of any obstructions.

Care and Cleaning

  • Unplug kettle and ALWAYS allow the kettle to cool before cleaning or handling.
  • Remove any leftover popcorn from the machine.
  • Use soapy water or other household cleaner to wipe kettle, kettle lids and crossbar clean.
  • Remove “old Maid” pan, empty un-popped kernels, then wipe clean.
  • Be sure to wipe both interior and exterior of the popcorn machine.

IMPORTANT: DO NOT submerge the kettle in water to clean! The bottom of the kettle contains the motor.

WARNING: DO NOT touch kettle when the machine is hot as it may cause serious injury.

NOTE: There will be a $37.50 cleaning charge which will be applied for each unit that is not returned clean. All machines must be returned in the same condition in which they were received – THOROUGHLY CLEANED & READY FOR USE. Please follow the above instructions to avoid any additional charges.

Your Cart

Your cart is empty.

Subscribe to Our Newsletter