20" CEREMONIAL SCISSORS

It provides a 60 dB gain adjustment for one mic or line input. The PressMite also features a built-in headphone amp. Two alkaline 9 V batteries provide power for typically more than 8 hours of continuous operation, monitored by a Battery OK LED. The batteries are easily replaced via side-mount trays. A 120 VAC / 24 VDC power adapter (model PS24) is included. In MIC input mode, 18V phantom power is selectable and a three segment LED headroom display speeds level adjustment. If more outputs are needed, PB Series Press Boxes can be connected to the line outputs to provide up to 48 additional mic outputs. The PressMite's box is built to withstand the abuse of public events. Frequency Response: 100 Hz-6 kHz +or-0.3 dB, 15Hz-20kHz +or-3.0 dB Input Impedance: Mic: 1.5 kOhms; Line: 40 kOhms Max Input Level: Mic: -14 dBu; Line: +30 dBu Output Impedance: Mic: 150 Ohms; Line: 600 Ohms Max Output Level: Mic: -17 dBu Mic Outputs; Line: +12 dBu Total Harmonic Distortion: 0.063% at 1 kHz (unity gain) Rise Time: 26 Microseconds Phase Shift: -0.8degrees at 1 kHz (unity gain) Intermodulation Distortion: 0.08% (unity gain, Mic mode) CMR at 60 Hz: Mic: 75 dB; Line: 60 dB Isolation: Mic Outputs: 65 dB between vertically adjacent channel pairs, 107 dB between non-vertically adjacent pairs Line Outputs: Greater than 77 dB Power Requirements: (2) 9 V alkaline batteries or 24 Volt external DC (120 VAC / 24 VDC power adapter included)

This generator is ultra quiet, light weight, portable and compact. It features whisper quiet operation, of 57 db(A) at rated load, 48 db(A) at 25% load. The unit will run for approximately 3.2 hours on a full tank. 2200 watts of Honda inverter 120 VAC power. Maximum continuous AC output of 1800 watts. Honda GXR120, OHC, 4 stroke, air cooled commercial engine, with manual recoil start. Weight: 46.5 lbs (21.1 kg) Length: 20" Width: 11.4" Height: 16.7" Fuel Tank Capacity: 3.6 L

It features 7 colour LED lighing that comes with remote control. More than one LED item can operate on the same remote. Integrated LED lighting is recessed into the column to protect the electronics. Dimensions: 12" X 12" X 68" tall We recommend you keep LED equipment plugged in at all times. If this isn't possible LED units should be plugged in for a minimum of 8 hours prior to use to maintain battery power during your event.