TV, STAND 37"- 70" ADJUSTABLE

Dimensions (W x D x H) 20.2 x 24.7 x 30.2 in Unobstructed 10" woofer with 6x 2" Drivers Max SPL Output 118 dB (peak) Class D amplifier 250W LF + 130W HF 6-channel mixer Channel 1-2 with bass, treble, reverb, mic/line selector, and combo 1/4" phone and XLR input Channel 3/4 with 1/4" balanced TRS jacks (stereo) or pair of RCA jacks (stereo) Channel 5/6 with 1/8" (3.5mm) input jack for portable electronics, or Bluetooth audio streaming Stereo monitor outputs Weight 40.8 lbs (18.5kg)

It provides a 60 dB gain adjustment for one mic or line input. The PressMite also features a built-in headphone amp. Two alkaline 9 V batteries provide power for typically more than 8 hours of continuous operation, monitored by a Battery OK LED. The batteries are easily replaced via side-mount trays. A 120 VAC / 24 VDC power adapter (model PS24) is included. In MIC input mode, 18V phantom power is selectable and a three segment LED headroom display speeds level adjustment. If more outputs are needed, PB Series Press Boxes can be connected to the line outputs to provide up to 48 additional mic outputs. The PressMite's box is built to withstand the abuse of public events. Frequency Response: 100 Hz-6 kHz +or-0.3 dB, 15Hz-20kHz +or-3.0 dB Input Impedance: Mic: 1.5 kOhms; Line: 40 kOhms Max Input Level: Mic: -14 dBu; Line: +30 dBu Output Impedance: Mic: 150 Ohms; Line: 600 Ohms Max Output Level: Mic: -17 dBu Mic Outputs; Line: +12 dBu Total Harmonic Distortion: 0.063% at 1 kHz (unity gain) Rise Time: 26 Microseconds Phase Shift: -0.8degrees at 1 kHz (unity gain) Intermodulation Distortion: 0.08% (unity gain, Mic mode) CMR at 60 Hz: Mic: 75 dB; Line: 60 dB Isolation: Mic Outputs: 65 dB between vertically adjacent channel pairs, 107 dB between non-vertically adjacent pairs Line Outputs: Greater than 77 dB Power Requirements: (2) 9 V alkaline batteries or 24 Volt external DC (120 VAC / 24 VDC power adapter included)

It features 7 colour LED lighting that comes with rechargeable battery system and remote control. More than one LED item can operate on the same remote. Integrated LED lighting is recessed into the column to protect the electronics. Dimensions: 12" X 12" X 44" tall We recommend you keep LED equipment plugged in at all times. If this isn't possible LED units should be plugged in for a minimum of 8 hours prior to use to maintain battery power during your event.

Dimensions: 41"W x 24 1/4" H Comes With Power Cord (65" L) and Remote Provides vivid images even in a bright environment, eliminating optical glare and minimizing light reflection